Autool CT160 Original Car Diesel Injector Tester & Heated Cleaner

AUTOOL CT160 Car Fuel Injector Tester Cleaner is a professional 4-cylinder car fuel injector test cleaning machine. It will help you clean and test the injectors of diesel cars and motorcycles. Support for multiple cars and motorcycles. Can only be used to clean diesel fuel injectors. The cleaning fluid is 3M car injector cleaning fluid, and the test fluid is industrial alcohol. The operating voltage range is 110-230V and has an English control panel.

Support for 99% cars and motorcycles:
Audi, Australia Ford, Benz, BMW, Brilliance, Chevrolet, Chevy, Chrysler, Citroen, Dacia, Dadi, Daewoo, Daihatsu, Demo, Fiat, Ford, GM, Holden, Honda, Hyundai, Isuzu, Jaguar, Kia, Lancia, Land Rover, Mahindra, Maruti, Mazda, Mitsubishi, Nissan, Opel, Peugeot, Porsche, Renault, Romeo, Rover, Saab, Seat, Skoda, Smart, Subaru, Suzuki, Tata, Toyota, Volvo, VW, Yamaha.

CT160 Original Car Fuel Injector Tester Cleaner Features:

1. [Wide range of applications]: CT160 car fuel injector tester and heater cleaner have good compatibility. Support for more cars and motorcycles to "clean" and "test" injector. And it can also be used to "clean" diesel fuel injectors.

2. [Easy to use]: When cleaning, attach the car injector nozzle into the socket of the washer tank, add an appropriate amount of 3M cleaning fluid, and the cleaning can be completed after turning on; When testing, attach the car injector nozzle into the oil separator and add it into the industrial alcohol glass tube, the test can be completed after power on.

3. [Leading Technology]: At present, only our company produces this portable and multifunctional automobile fuel injector cleaning and testing machine, and it has obtained a special patent.

4. [Safety]: The operating voltage range is 110-230V. If the machine is short-circuited, the fuse inside will automatically trip to shut down the running machine and avoid electric shock.

5. [3 Years Warranty]: For damage caused by non-human factors, we promise to resend the parts free of charge within 3 years.

CT160 Car Fuel Injector Tester Cleaner how to work:

1. Clean the outside of the injector nozzle with cleaning fluid before opening the machine. Place the injectors into the ultrasonic bath after the outside of the injector is free of debris. The cleaning fluid must not extend beyond the connection opening of the impulse line.

2. Turn on the ultrasonic system to allow the ultrasonic energy to dislodge any particles that have accumulated inside the injectors. After cleaning, the remaining cleaning fluid can be reused.

3. Attach the injectors to the main engine and check the injectors for resistance, short circuits and current consumption. The test liquid can be placed in half of the glass tube.

4. Carrying out leak testing, spray pattern and flow testing on the flow test bench. The injectors are now returned to the flow test bench for all functions to be checked again.

Main function:

A. Cleaning the injector nozzle with ultrasound.

B. Cleaning the spark plug. Place the spark plug in the cleaning tank, add clean fluid and start cleaning.

C. Testing the injector in various situations, checking for leaks and blockages.

D. Cleaning the injector nozzle without dismantling.

E. Cleaning the throttle body without dismantling.

F. Motorcycle injector cleaning and testing, test function only for HONDA, YAMAHA, SUZUKI and SANYANG injectors.

Questions and answers:
1. No response from the device
Check whether the fuse on the bottom of the right side of the machine is damaged. If it is damaged, please replace the fuse (AC 250V/5A).

2. Oil leak from oil separator unit
If there is oil leakage from the oil separator, please check whether the installed "O" ring fits and whether it is deformed or damaged. If it doesn't fit or is damaged, please replace it. The two black adjusting screws should not be overtightened; overtightening will also cause oil leakage from the oil separator.

3. Oil pressure drops slowly
The oil pressure cannot drop to zero within 1 to 2 minutes, and you can adjust the pressure relief valve counterclockwise with the hex wrench.

4. The buzzer sounds for a long time without oil pressure
The machine is equipped with an oil shortage alarm function. If the fluid level in the oil tank is insufficient, a tone will sound and the oil pump and fuel injector will automatically turn off and stop again later. In this condition, the warning tone will automatically stop after enough cleaning fluid has been refilled. At this time, you need to press the [Run] button to start the oil pump again.

5. The "Drain" button must be pressed twice to completely drain the test solution.
The device's solenoid valve has an automatic shut-off function within 15 seconds; If there is more liquid in the glass tube, multiple emptyings may be necessary.

6. The amount of cleaning and testing solution added
When adding cleaning fluid, the cleaning fluid in the ultrasonic box should not go beyond the connection opening of the injection nozzle; When adding test liquid, the test liquid should not be more than two-thirds of the level indicator of the glass tube.

7. Problems cleaning and testing 4 injectors
There is a short circuit in the machine, which causes the protection of the machine to restart. It may be that the injector resistance value is too low or there is a problem with the injector. You need to locate the problematic nozzle and replace it with another, regular nozzle for cleaning. If there is no problem with the injector, one of the pulse lines is damaged. There are 6 pieces of impulse lines, and each impulse line needs to be tested separately. If all 6 pieces of impulse lines can be used normally, this is the fuel nozzle problem.

Package List:
- AUTOOL CT160 fuel injector diagnosis and cleaning machine main unit
- Funnel for refilling
- Ultrasonic cleaning stand
- Test pad
- 2x oil drain valve
- Safety bar
- Lock nut
- Extended plug
- 4x connection for the upper oil inlet of the motorcycle
- 4x oil inlet connectors at the top of the motorcycle
- 4x connection for oil inlet at the top of the motorcycle
- 4x connection for upper oil inlet on the car
- 3x plugs
- Signal line
- Adapter cable
- Oil rail
- Instructions for use

FREE SHIPPING FOR ORDERS OVER 50 €!!

The goods are usually delivered by post to the delivery address provided by the customer. When processing the transaction, the delivery address provided by the customer on eBay is decisive. If the payment method selected is PayPal, the delivery address provided by the customer on PayPal at the time of payment is decisive.

If delivery to the customer was not possible and the transport company returns the shipped goods to the seller, the customer bears the costs for the unsuccessful shipment. This does not apply if the customer exercises his right of withdrawal by refusing to accept the goods, if he is not responsible for the circumstances that led to the impossibility of delivery or if he was temporarily prevented from accepting the goods, unless the seller announced the service to him a reasonable time in advance.

You can choose to pay in advance, via PayPal (direct debit and credit card via PayPal) or cash on delivery. If you choose cash on delivery, an additional fee of €9.99 will be charged.

Free shipping within Germany from 50€ value of goods

Shipping costs within the EU are 14,99 €.

The delivery time within Germany is 2-3 working days