Autel MaxiIM IM608 Pro OBD2 vehicle diagnostic device XP400 Pro IMMO key programmer

The MaxiIM IM608 Pro is a full-fledged diagnostic system that, in addition to standard diagnostics, can also program keys and immobilizers as well as control devices. The IM608 is based on an Android tablet and is equipped with a hexa-core processor. The 10.1" touchscreen impresses with its intuitive operation and excellent performance. The IM508 is equipped with an XP400 key programmer with a comprehensive anti-theft system service function. Combination of a wide range of special functions and programming functions. Packaged in one device, it is the perfect solution for workshops and technicians.

Characteristics:
Smart mode: automatic/guided key programming
Expert mode: advanced key programming
Read PIN/security code (e.g. if all keys are lost)
Program/generate/train keys/remote controls
Reset/learn/renew/code immobilizer control unit
Teaching FEM/BDC key (BMW) including control unit coding
Teach MQB keys (VW, Audi, Seat, Skoda), teach 96 bit/48 transponder keys etc.
Diagnosis (reading/deleting the error memory) of all control devices
SIA reset (service interval display)
EPB reset (electronic parking brake/parking brake)
DPF regeneration (diesel particulate filter)
LWS calibration (steering angle sensor)
BMS initialization (starter battery)
Learning the throttle valve
WFS functions (Immobilizer & Key)
Injector coding
TPMS programming (tire pressure monitoring system)
Diagnostic-supported brake bleeding
Calibration of the suspension/suspension
Mileage adjustment/correction
Changing the system language
Headlight setting/adjustment
Changing tire size
(Availability of the aforementioned special functions depends on the vehicle type and is therefore not always available)
Auto Scan - Automatic scan of all control devices in the vehicle
Quick Erase - Automatically delete all error memory entries
AutoVIN - reads the VIN/VIN from the vehicle and automatically identifies the vehicle type (if supported by the vehicle)
Compatible with almost all OBD2 compliant vehicles (OBD II & EOBD)
OBD1 compatible
Simple & intuitive menu navigation/operation
Display of error codes in plain text
advanced OBDII mode 6
Memory for the read data for remote analysis after diagnosis
Reading, saving and replaying live data from the sensors
Data can be displayed as a graph/diagram
Display of freeze frame & live data as well as lambda sensor values
Display of vehicle information (FIN - chassis number, CIN - Calibration Identification Number, CVN - Calibration Verification Number)
PC interface for printing out diagnostic data

XP400 Key Programmer:
Read/write EEPROM/MCU
Read/write keys (including Mercedes infrared key)
Read/write control devices
Determine the frequency of radio remote controls
Read/write MS9S12 (encrypted chip).

Supported vehicles:
Acura, Alfa Romeo, Audi, Bentley, BMW, Bugatti, Chrysler, Citroen, Dacia, Daewoo, Fiat (including Abarth), Ford, GM, Holden, Honda, Hyundai, Infiniti, Isuzu, Jaguar, Kia, Lancia, Land Rover , Lexus, Mahindra, Maruti Suzuki, Maybach, Mazda, Mercedes Benz (incl. Sprinter), Mini, Mitsubishi, Nissan, Opel, Peugeot, Porsche, Renault, Saab, Scion, Seat, Skoda, Smart, Subaru, Suzuki, Tata, Toyota, Vauxhall, Volkswagen (VW), Volvo

Technical data:
Operating system: Android 4.4.2 KitKat
Processor: Samsung Exynos 6-Core (1.3 GHz quad-core ARM Cortex-A7 + 1.7 GHz dual-core ARM Cortex-A15)
Storage: 64GB SSD hard drive
Display: 10.1" LED touch display with 1024 x 600 pixel resolution
Connectivity: WiFi, USB, HMDI, Bluetooth
Sensors: Accelerometer, Ambient Light Sensor
Battery: 3.8V / 15,000mAh lithium polymer
Power consumption: approx. 6.5 watts
Operating temperature: 0°C to +50°C
Storage temperature: -20°C to +60°C
Weight: 1.42 kg (tablet) / 8.7 kg (with case)

Protocols:
ISO9141-2, ISO14230-2, ISO15765-4, VW UDS, K/L Line, blink codes, SAE J1850 VPW, SAE J1850 PWM, CAN ISO 11898, HS, MS, LS and SW CAN, GM UART, UART Echo Byte Protocol , Honda Diag-H protocol, TP2.0, TP1.6, SAE J1939, SAE J1708, Fault-Tolerant CAN etc.

Scope of delivery:
- AUTEL MaxiIM IM608 diagnostic tablet
- Diagnostic interface MaxiFlash J2534
- XP400 Pro Key Programmer
- OBD cable
- USB cable
- APA107 (connection cable)
- APA106 (MC9S12 clamp)
- APA105 (MCU terminal)
- APA104 (ECU terminal)
- APA103 (EEPROM terminal)
- APA101 (single cable)
- APA002 (EEPROM socket)
- APB108 (MCU_FQFP176)
- APB107 (MCU_FQFP144)
- APB106 (MCU_FQFP112)
- APB105 (MCU_FQFP80)
- APB104 (MCU_FQFP64)
- APB102 (MB infrared cable)
- APB101+APD101 (EEPROM adapter)
- APC101 (USB cable)
- AAC001 (MED17 cable)
- Fuses (2x)
- Cigarette lighter charging cable
- Power adapter
- Plastic case
- Printed manual in English

FREE SHIPPING FOR ORDERS VALUE OVER €50!!

The goods are delivered regularly via shipping and to the delivery address specified by the customer. When processing the transaction, the delivery address provided by the customer on eBay is decisive. Deviating from this, if you select the PayPal payment method, the delivery address provided by the customer with PayPal at the time of payment is decisive.

If delivery to the customer was not possible and the transport company sends the shipped goods back to the seller, the customer bears the costs for the unsuccessful shipping. This does not apply if the customer exercises his right of withdrawal by refusing acceptance, if he is not responsible for the circumstance that led to the impossibility of delivery or if he was temporarily prevented from accepting, unless the seller has announced the service to him a reasonable time in advance.

You can choose to pay in advance, Paypal (direct debit and credit card via Paypal) and cash on delivery. If you choose the cash on delivery payment method, an additional fee of €9.99 will be charged.

Free shipping within Germany for orders worth €50 or more

Shipping costs EU are €14.99.

The delivery time within Germany is 2-3 working days