Purchased more than 211 times
Autel MaxiIRT IR100 thermal imaging camera infrared camera 3.5" TFT display 8GB
✓ High reliability and long service life
✓ Easy handling and user-friendliness
✓ Fast and competent customer service
✓ 12 months warranty
Autel MaxiIRT IR100 thermal imaging camera infrared camera 3.5" TFT display 8GB is backordered and will ship as soon as it is back in stock.
Autel MaxiIRT IR100 thermal imaging camera infrared camera 3.5"...
Description
Description
IR100 High-Performance Thermal Imaging Camera - Precise Temperature Measurement and Diagnostics
The IR100 thermal imaging camera enables non-contact temperature measurement from -20°C to 450°C and visualizes heat fluctuations, losses, and accumulations on its integrated 3.5-inch TFT display. With its dual-camera overlay function, thermal images can be superimposed on standard images to create easily identifiable images. The IR100 thermal imaging camera features high resolution, autofocus, a frame rate of 0.98 seconds, and supports Wi-Fi image transfer to PCs or mobile devices (including MaxiSYS tablets) for fast and accurate diagnostics.
Thanks to adjustable emissivity and five color palettes, the IR100 thermal imaging camera is ideal for diagnosing engines, brakes, bearings, exhaust systems, seat heaters, air conditioning systems, and many other vehicle components. The non-contact measurement allows for the reliable analysis of even hard-to-reach or very hot components without the need for mechanical sensors or probes.
Operating principle of the IR100 thermal imaging camera
The IR100 thermal imaging camera uses an infrared sensor that detects thermal radiation in the wavelength range of 8 to 14 µm. Every surface emits infrared radiation depending on its temperature. The camera converts this radiation into digital measurements and displays them as a visual thermal image.
Detection of temperature differences
The IR100 thermal imaging camera has a thermal sensitivity of 0.07 °C. This allows even minimal temperature deviations to be visualized. Especially when diagnosing electrical components, mechanical bearings, or cooling circuits, small temperature differences can provide early indications of potential defects.
Infrared and visual image overlay
The integrated dual-camera technology combines the visible camera image with the thermal image. This overlay function facilitates the precise correlation of measured temperature ranges to actual components. This feature is a crucial advantage of the IR100 thermal imaging camera, especially in complex engine compartment layouts or densely packed assemblies.
Adjustable emissivity for precise measurements
Different materials have different emissivity levels. Metals, plastics, and painted surfaces reflect heat to varying degrees. The IR100 thermal imaging camera allows for manual adjustment of the emissivity between 0.01 and 1.00. This enables measurements to be precisely tailored to the specific material, providing reliable temperature readings.
Typical diagnostic applications in the workshop
In modern automotive workshops, the IR100 thermal imaging camera has established itself as a versatile diagnostic tool. The visual representation of temperature distributions allows many faults to be detected more quickly than with traditional measurement methods.
Diagnostics of brake systems
After a test drive, brake discs, brake pads, or brake calipers can be inspected with the IR100 thermal imaging camera. An uneven temperature distribution often indicates seized brake calipers, unevenly contacting pads, or locked brake components.
Inspection of wheel bearings and drive trains
Overheated wheel bearings can be identified very quickly. A defective or worn bearing generates a significantly higher temperature than the opposite side due to increased friction. The IR100 thermal imaging camera makes these differences immediately visible.
Analysis of cooling circuits
The IR100 thermal imaging camera also offers valuable diagnostic capabilities in the area of engine cooling. Blocked radiators, defective thermostats, or uneven coolant circulation can be identified by analyzing temperature profiles along hoses and radiator surfaces.
Testing of electrical components
Electrical resistors, connectors, or control units can become unusually hot if they have increased contact resistance. The IR100 thermal imaging camera allows these hotspots to be quickly identified before a component failure occurs.
Image analysis and color palettes of the IR100 thermal imaging camera
The IR100 thermal imaging camera offers various color palettes that visually highlight different temperature ranges. Depending on the application, the display can be adjusted to make temperature differences more easily recognizable.
Iron red
This color palette is frequently used in technical diagnostics. Warm areas appear in yellow to reddish tones, while cooler areas are shown in darker shades. This makes it very easy to identify heat sources.
Rainbow
The rainbow palette is particularly suitable for complex temperature analyses with many gradations. It represents temperature differences in several color ranges and enables a very differentiated analysis.
black and white representation
For certain diagnostic tasks, a high-contrast black-and-white representation can be helpful. This type of representation is particularly clear when locating heat leaks or uneven temperature distributions.
Data storage and Wi-Fi data transmission
The IR100 thermal imaging camera has an integrated 8 GB memory. This allows numerous thermal images and measurement data to be saved directly on the device and analyzed later.
Documentation of diagnostic work
Documenting diagnoses is playing an increasingly important role in workshops. The IR100 thermal imaging camera allows thermal images to be saved and later used in service reports or diagnostic logs.
Wireless image transmission
The integrated Wi-Fi function allows images to be transferred directly to PCs, smartphones, or diagnostic devices such as MaxiSYS tablets. This enables immediate analysis of measurement results or sharing with colleagues and customers.
Technical data:
| category | Details |
|---|---|
| Display | 3.5-inch full-screen TFT |
| Infrared image resolution | 320 x 240 pixels |
| Visible image resolution | 300,000 pixels |
| LCD resolution | 640 x 480 pixels |
| Field angle | 56° x 42° |
| Thermal sensitivity | 0.07 °C |
| Thermal imaging frame rate | 9 Hz |
| Focus mode | Firmly |
| Wavelength coverage | 8-14 µm |
| Emission level | Adjustable from 0.01 to 1.00 |
| color palette | Iron red, Cool, White, Black, Rainbow |
| Measuring range | -20 °C to 450 °C |
| Storage space | 8 GB (integrated) |
| File format | JPEG |
| USB | Micro USB 2.0 |
| power supply | Integrated Li-ion battery (5,000 mAh) |
| Duration | 3-4 hours |
| Languages | German, English, Chinese, Italian |
| Automatic shutdown | Selectable: 5 / 20 min / off |
| Dimensions | 256 mm x 97.2 mm x 128.9 mm |
| Weight | 588 g |
| Operating temperature | 0 to 45 °C |
| Storage temperature | -20 to 60 °C |
Recommended car models for use with the IR100 thermal imaging camera
The IR100 thermal imaging camera can be used in principle on almost all types of vehicles. It is particularly useful for vehicles with complex engine and cooling systems or models with extensive electrical equipment.
Suitable vehicle models for diagnosis
- BMW 5 Series (G30)
- Mercedes-Benz E-Class (W213)
- Audi A6 (C7 / C8)
- Volkswagen Passat B8
- Ford Transit
Recommended application on the Volkswagen Passat B8
The IR100 thermal imaging camera is particularly recommended for use with the Volkswagen Passat B8 . This model features complex cooling systems, numerous electrical control units, and advanced driver assistance systems. The IR100 thermal imaging camera allows for highly efficient analysis of temperature differences within the cooling system, at electrical connections, and on brake components. This enables workshops to reduce diagnostic times and detect potential damage early on.
Scope of delivery:
- MaxiIRT IR100 thermal imaging camera
- HDMI cable
- 8.5 mm recording heads and cables
- Transport bag
- Magnet and hook
- User manual
- Mini USB cable
Precise thermal imaging diagnostics for professional workshops
The IR100 thermal imaging camera is a powerful diagnostic tool for workshops, maintenance facilities, and technical service departments. The combination of precise infrared measurement, high image resolution, and practical analysis functions allows for the quick detection and documentation of temperature problems.
The IR100 thermal imaging camera provides valuable visual information, especially when troubleshooting engines, electrical systems, brake components, or air conditioning systems. Its ease of use, wireless data transmission, and robust design make it a reliable tool for everyday workshop use.
Shipping and payment conditions
Shipping and payment conditions
FREE SHIPPING ON ORDERS OVER €50!!
The goods are regularly delivered by mail to the delivery address provided by the customer. For processing the transaction, the delivery address stored by the customer on eBay is decisive. However, if PayPal is selected as the payment method, the delivery address stored by the customer with PayPal at the time of payment is decisive.
If delivery to the customer was not possible and the shipping company returns the goods to the seller, the customer bears the costs of the unsuccessful delivery. This does not apply if the customer exercises their right of withdrawal by refusing acceptance, if they are not responsible for the circumstances that led to the impossibility of delivery, or if they were temporarily prevented from accepting the delivery, unless the seller had notified them of the delivery a reasonable time in advance.
You can choose to pay by prepayment, PayPal (direct debit and credit card via PayPal), or cash on delivery. A surcharge of €9.99 will be added for cash on delivery payments.
Free shipping within Germany for orders over €50
Shipping costs within the EU are €14.99.
Delivery within Germany takes 2-3 working days.
Further information
The importance of automotive diagnostic devices for vehicle maintenance
The importance of automotive diagnostic devices for vehicle maintenance
Original diagnostic devices for cars and trucks are indispensable tools for modern vehicle maintenance and repair. These devices make it possible to read error codes generated by the various control units of a vehicle. By using professional diagnostic devices, workshops and vehicle owners can quickly and precisely identify and resolve problems. This increases the efficiency of the repair processes and contributes to the longevity of the vehicles. Professional diagnostic devices also offer advanced functions such as in-depth diagnostics and programming of control units, which is particularly useful for complex repairs and maintenance work. With a vehicle diagnostic device, you can ensure that your vehicle is always in perfect condition.
Why professional diagnostic devices are indispensable
Why professional diagnostic devices are indispensable
Professional diagnostic devices are specially designed for use in workshops and by professionals. They offer comprehensive diagnostic capabilities and support a wide range of vehicle makes and models. These devices can not only read and clear error codes , but also display live data and perform special tests such as actuator tests. They also allow the calibration of control units and the performance of service resets. Thanks to these advanced functions , professional diagnostic devices can make the work of mechanics much easier and improve the quality of the repairs carried out. A professional diagnostic device is therefore an indispensable tool for every professional workshop.
How OBD diagnostic devices work
How OBD diagnostic devices work
OBD (On-Board Diagnostic) systems are standardized diagnostic tools used in almost all modern vehicles. These systems monitor the vehicle's performance and emissions and store error codes when a problem occurs. OBD diagnostic devices can read these error codes and provide detailed information about the condition of the vehicle. This includes monitoring engine parameters, exhaust emissions and other critical systems. By using OBD diagnostic devices regularly, potential problems can be identified and resolved early before they lead to larger and more costly damage. An OBD diagnostic device should therefore be in every vehicle to make car diagnostics efficient and comprehensive.
Auto diagnostics: A key to efficient vehicle repair
Auto diagnostics: A key to efficient vehicle repair
Auto diagnostics includes a variety of techniques and tools for monitoring and analyzing the condition of a vehicle. By using modern original diagnostic devices for cars and trucks Mechanics can carry out precise fault analyses and make targeted repairs. This not only saves time, but also costs for the vehicle owner. Modern diagnostic devices also offer the option of carrying out software updates and making adjustments to the vehicle control units. This is particularly important for optimizing vehicle performance and adapting to individual requirements. The continuous development of diagnostic technology helps to ensure that vehicles can be operated more safely and efficiently. With a reliable car diagnostic device, you always have all the important information at hand to optimally maintain and repair your vehicle.