Pro Diagnostic Tool Cars Trucks Buses & CNH Machinery 2025 – Toughbook CF-54

Professional Car Diagnostic Tool for Cars, Trucks, Coaches and CNH Construction Machinery

• ✔ 24 months of technical support
• ✔ 12 months warranty
• ✔ Fully set up & ready to use immediately
• ✔ 3 years of free updates for the car software
• ✔ Developed for independent workshops and professional use
• ✔ 30-day Autodata demo version free of charge

This professional combination device was developed specifically for independent workshops, commercial vehicle operators and diagnostic professionals. As a genuine complete solution it covers cars, trucks, coaches and CNH construction machinery with a single system in workshop quality – for precise professional car diagnostics, maintenance and service work in daily commercial use. The system is delivered fully set up and tested and is ready to use immediately. Purchase on account is possible (Klarna or PayPal).

Vehicle coverage by vehicle class and model year

• Cars up to model year 2025 – including 3 years of free updates for the car software
• Trucks up to model year 2023
• Coaches up to model year 2023
• CNH construction machinery up to model year 2026

110 car brands

In the car segment, 110 car brands from Europe, Asia and America are supported. Control units can be read out quickly, live data analysed and extensive service functions carried out:

Alfa Romeo, Audi, BMW, Buick, Cadillac, Chevrolet, Chrysler, Citroën, Dacia, Daewoo, Daihatsu, Dodge, Fiat, Ford, Honda, Hyundai, Infiniti, Isuzu, Jaguar, Jeep, Kia, Lada, Lancia, Land Rover, Lexus, Lincoln, Mazda, Mercedes-Benz, MG, Mini, Mitsubishi, Nissan, Opel, Peugeot, Porsche, Proton, Renault, Rover, Saab, Seat, Škoda, Smart, SsangYong, Subaru, Suzuki, Toyota, Volvo, Volkswagen and many more.

Over 60 truck and bus brands

For commercial vehicles and coaches, over 60 truck and bus brands are covered, including:

Mercedes-Benz, MAN, Scania, Volvo, DAF, Iveco, Renault Trucks, Setra, Neoplan, Solaris, VDL, Van Hool, Temsa, Otokar, Bova, Isuzu, Hino, Fuso, Kässbohrer, Kögel, Schmitz Cargobull, Krone and many more.

CNH construction machinery with the CNH Electronic Service Tool

For construction machinery and agricultural equipment the CNH Electronic Service Tool (EST) is used. Coverage includes, among others:

• Case IH / Case Construction – e.g. Puma, Maxxum, Magnum, Farmall, CVX as well as excavators of the CX series and wheel loaders
• New Holland – e.g. T7, T6, T5, TM and TG series as well as excavators and wheel loaders of the W series
• Steyr – e.g. Profi, CVT, Kompakt and Expert
• Iveco / FPT engines, as far as covered by the CNH EST

Fault diagnosis, ECU programming, parameter adaptation and real-time monitoring of engine and hydraulic values are possible.

30-day Autodata demo version free of charge

With this combination device you receive a free 30-day Autodata demo version. It lets you test repair instructions, maintenance schedules, wiring diagrams and technical data without obligation and check whether an Autodata subscription is worthwhile for your workshop.

Important note on vehicle coverage

The statement "up to model year 2025" describes the overall period that the device can cover across all supported brands – it does not mean that every brand or every model is automatically supported in full up to 2025. Which vehicles and functions are actually available always depends on the manufacturer, model, model year and control unit. The 3-year update guarantee for the car software ensures that car coverage grows continuously and that new vehicle models are added on an ongoing basis.

In-depth diagnostics for modern control units

This diagnostic tool allows engine control units, transmissions, ABS, ESP, airbag and comfort systems to be analysed professionally. The available diagnostic and service functions always depend on the model, the brand and the control unit.

• Read and clear fault codes
• Analyse live data in real time
• Call up control unit information
• Carry out actuator tests
• Adaptations and calibrations

Important service functions for workshops

• Oil service reset
• DPF regeneration
• Electronic brake service
• Steering angle sensor calibration
• Battery registration
• AdBlue reset and diagnostics
• Injector coding
• Driver assistance calibrations

Supported diagnostic protocols

• OBD2
• CAN bus
• KWP2000
• ISO9141
• J1939
• LIN bus

Rugged Panasonic Toughbook CF-54 for workshop use

Supplied is a refurbished Panasonic Toughbook CF-54 in tested, technically perfect condition. The rugged housing is made for professional continuous use in workshops and service businesses. Refurbished devices are fully tested and delivered with 12 months warranty.

The battery is a wear part and is not covered by the warranty.

Scope of delivery

• Panasonic Toughbook CF-54 (refurbished, fully set up and tested)
• Vident Bluetooth multiplexer for cars
• Automaster FSX Pro multiplexer for trucks and buses
• CNH Dearborn DPA5 multiplexer for construction machinery
• OBD2 diagnostic cable and adapters
• 9-pin adapter cable
• USB cable and connection accessories
• Charger
• Pre-installed diagnostic software
• 30-day Autodata demo version

Updates, functions and control unit access always depend on the vehicle and the manufacturer. The 3 years of free updates apply exclusively to the car software.

Free shipping from €50 (Germany) – within the EU from €100

Delivery

Delivery is made to the delivery address provided by the customer during the ordering process. By way of exception, where PayPal is selected as the payment method, the delivery address stored with PayPal at the time of payment is decisive.

If delivery to the customer was not possible and the transport company returns the goods to the seller, the customer bears the costs of the unsuccessful delivery. This does not apply where the customer exercises their right of withdrawal by refusing acceptance, where they are not responsible for the circumstance that made delivery impossible, or where they were temporarily prevented from accepting the goods – unless the seller had given them reasonable advance notice of the delivery.

Shipping costs

• Germany: free from an order value of €50, below that €3.99
• European Union: free from an order value of €100, below that €14.99
• Switzerland: €20.00
• United Kingdom: GBP 20.00

Delivery area and delivery time

We deliver to Germany, to the 26 other countries of the European Union and to Switzerland and the United Kingdom. We are currently unable to deliver to other countries.

For deliveries to Switzerland and the United Kingdom, customs duties, import taxes or other charges may be incurred in addition; these are borne by the customer.

The delivery time within Germany is usually 1–3 working days.

Payment methods

You can pay by credit card (Visa, Mastercard, Maestro), PayPal, Klarna (purchase on account or instalments), Shop Pay, Apple Pay, Google Pay, advance payment by bank transfer or cash on delivery.

Cash on delivery is only available for deliveries within Germany from an order value of €50. An additional fee of €9.99 is charged for it.

Digital licences and activations

Update licences, secure gateway activations and HaynesPro access are digital goods. No shipping costs apply – you will receive the activation code by email once payment has been received, usually within 1–3 working days.

If the licence is tied to a device, enter your device’s serial number directly in the order form when purchasing. That way we can set up the activation for your device without further enquiries.

Please note: for digital licences the right of withdrawal expires as soon as we have begun providing the item and you have expressly agreed to this beforehand. For devices and all other goods, the statutory right of withdrawal applies unchanged.