VDIAGTOOL V210 Car Short Circuit Finder – Locate Opens & Trace Wires, 6–42 V
VDIAGTOOL V210 Car Short Circuit Finder – Locate Opens & Trace Wires, 6–42 V is backordered and will ship as soon as it is back in stock.
Description
Description
VDIAGTOOL V210 – Pinpoint short circuits and open circuits in the vehicle electrical system
- ✔ Locate shorts, find open circuits, trace wires – three functions in one set
- ✔ For DC vehicle electrical systems from 6 to 42 V – cars, vans, motorcycles and commercial vehicles
- ✔ No stripping required: the receiver follows the signal right through the insulation
- ✔ Receiver with flexible probe, speaker and adjustable sensitivity
The VDIAGTOOL V210 is a short circuit and open circuit finder for automotive electrics in independent workshops and commercial use. Instead of removing trim panels on suspicion, you use the transmitter to inject a signal into the affected circuit and follow it along the wire with the receiver. Where the signal stops, that is where the open circuit or the short is – so you find faults in wiring harnesses, at connectors and at loads in workshop quality and much faster.
How the V210 works
The transmitter is connected with the red and black test leads and alligator clips, for example to a fuse socket or a connector. Use the switch to select the mode: TONE for finding open circuits and tracing a wire, CONT for continuity and short circuits. With the receiver you follow the wire – the signal tone shows where the signal is still present. Use the adjustment wheel to set the sensitivity so that neighbouring wires in the harness do not interfere.
Typical applications
Fuses that blow for no obvious reason, short circuits in the lighting and trailer socket, broken wires after accident or marten damage, and locating a specific wire in a wiring harness. The V210 complements circuit testers and multimeters: they show that there is a fault – the V210 shows where.
Please note
The V210 is intended exclusively for DC vehicle electrical systems from 6 to 42 V and not for mains voltage (230 V). The device does not measure voltage values and has no display – it is used for locating faults. Transmitter and receiver run on 9 V block batteries.
Technical data
| Model | VDIAGTOOL V210 |
|---|---|
| Functions | Locate shorts, find open circuits, trace wires |
| Vehicle electrical system | DC voltage 6 to 42 V |
| Transmitter | TONE / OFF / CONT switch, red and black test leads with alligator clips |
| Receiver | flexible probe (approx. 18 cm), speaker, sensitivity control |
| Power supply | 9 V block battery |
| Operating temperature | 0 to 60 °C |
| Housing | ABS plastic |
Scope of delivery
– VDIAGTOOL V210 transmitter with red and black test leads and alligator clips
– VDIAGTOOL V210 receiver with flexible probe
Buy on invoice available (Klarna or PayPal). Professional tool in workshop quality for independent workshops and commercial use – if you have any questions about using it, we will be happy to advise you by phone.
Shipping and payment terms
Shipping and payment terms
Free shipping from €50 (Germany) – within the EU from €100
Delivery
Delivery is made to the delivery address provided by the customer during the ordering process. By way of exception, where PayPal is selected as the payment method, the delivery address stored with PayPal at the time of payment is decisive.
If delivery to the customer was not possible and the transport company returns the goods to the seller, the customer bears the costs of the unsuccessful delivery. This does not apply where the customer exercises their right of withdrawal by refusing acceptance, where they are not responsible for the circumstance that made delivery impossible, or where they were temporarily prevented from accepting the goods – unless the seller had given them reasonable advance notice of the delivery.
Shipping costs
- Germany: free from an order value of €50, below that €3.99
- European Union: free from an order value of €100, below that €14.99
- Switzerland: €20.00
- United Kingdom: GBP 20.00
Delivery area and delivery time
We deliver to Germany, to the 26 other countries of the European Union and to Switzerland and the United Kingdom. We are currently unable to deliver to other countries.
For deliveries to Switzerland and the United Kingdom, customs duties, import taxes or other charges may be incurred in addition; these are borne by the customer.
The delivery time within Germany is usually 1–3 working days.
Payment methods
You can pay by credit card (Visa, Mastercard, Maestro), PayPal, Klarna (purchase on account or instalments), Shop Pay, Apple Pay, Google Pay, advance payment by bank transfer or cash on delivery.
Cash on delivery is only available for deliveries within Germany from an order value of €50. An additional fee of €9.99 is charged for it.
Digital licences and activations
Update licences, secure gateway activations and HaynesPro access are digital goods. No shipping costs apply – you will receive the activation code by email once payment has been received, usually within 1–3 working days.
If the licence is tied to a device, enter your device’s serial number directly in the order form when purchasing. That way we can set up the activation for your device without further enquiries.
Please note: for digital licences the right of withdrawal expires as soon as we have begun providing the item and you have expressly agreed to this beforehand. For devices and all other goods, the statutory right of withdrawal applies unchanged.
Questions about this product? Send us a message.
Frequently asked questions
What is the VDIAGTOOL V210 used for?
What is the VDIAGTOOL V210 used for?
The V210 locates short circuits and open circuits in the vehicle electrical system and helps you trace a specific wire in the wiring harness. It shows where the fault is – for example with fuses that keep blowing or a broken wire after marten damage.
Which vehicles is the V210 suitable for?
Which vehicles is the V210 suitable for?
For all vehicles with a DC electrical system from 6 to 42 V, i.e. cars, vans, motorcycles as well as trucks and buses with 24 V. The V210 is not suitable for mains voltage (230 V).
Do I have to strip or cut wires to use it?
Do I have to strip or cut wires to use it?
No. The transmitter is connected to a fuse socket, connector or wire end, and the receiver detects the signal through the insulation. The wiring harness and insulation remain undamaged.
What is included in the scope of delivery?
What is included in the scope of delivery?
You receive the transmitter with red and black test leads and alligator clips, plus the receiver with flexible probe. Transmitter and receiver each need a 9 V block battery to operate – please have these ready.
VDIAGTOOL V210 Car Short Circuit Finder – Locate Opens & Trace Wires, 6–42 V

