Buy now, pay in installments – with Klarna
Telephone service: 0711 - 3654 4645
5.0 out of 5 stars on Trustami
Free shipping from 50€ in DE
Shipping within 24 hours
💶 Ihr Preis zählt – jetzt Preisvorschlag senden!
auto-diagnostik  |  SKU: SW11321  |  EAN: 4260469475832

Diesel Compression Tester 18 pcs for Car & Truck – 0–70 bar, 14 Thread Adapters

5990 €
Tax included Shipping calculated at checkout.
Already sold 31×
Free Shipping for orders over 100€

  Ready for dispatch - at your place in 1-3 days
💬
Not sure if this device fits your workshop?We give honest advice – usually within minutes:
american_express
apple_pay
google_pay
klarna
maestro
master
paypal
sofort
0–70 bar dual scale80 mm gauge, also in psi
8 glow plug adaptersM8 × 1 to M12 × 1.25
Injector & screw adapters6 pieces, M18 × 1.5 to M24 × 2
For diesel enginesCars, vans, trucks, tractors

Description

Diesel compression tester 18 pcs – Measure compression via the glow plug or injector hole

  • ✔ Gauge 0–70 bar (0–1000 psi), Ø 80 mm, with rubber protective boot
  • ✔ 8 glow plug adapters from M8 × 1 to M12 × 1.25
  • ✔ 6 injector and screw-in adapters from M18 × 1.5 to M24 × 2
  • ✔ Approx. 50 cm hose with brass quick coupler, release button on the gauge

Starting problems, loss of power or rough idling on a diesel: the cause is often insufficient compression in individual cylinders. The 18-piece diesel compression tester is screwed in instead of the glow plug or injector and shows the compression pressure of each cylinder. A professional test set in workshop quality for independent workshops and commercial use – for diesel engines in cars, vans and trucks as well as in tractors and working machinery.

How to measure

Remove the glow plug or injector of the cylinder to be tested, screw in the appropriate adapter and connect the gauge via the quick coupler. Deactivate the fuel injection, crank the engine with the starter motor and read off the maximum value. Reset the reading with the release button and test the next cylinder. What matters is the comparison: if one cylinder deviates significantly from the others, it is suspect.

Adapters for glow plug and injector holes

The eight slim glow plug adapters cover the threads M8 × 1, M10 × 1, M10 × 1.25 and M12 × 1.25. For the injector hole, adapters with M20 × 1.5, M22 × 1.5, M24 × 1.5 and M24 × 2 are included, plus a long M18 × 1.5 screw-in adapter. The set is completed by a holding plate as well as a copper ring, rubber ring and aluminium sealing cone for sealing.

Please note

The tester is intended for diesel engines; spark plug adapters for petrol engines are not included. Whether an adapter fits depends on the thread, bore depth and installation situation – please compare the thread specifications beforehand. When removing and installing injectors, the specifications of the vehicle manufacturer apply; the sealing rings on the injector generally have to be replaced. Take the specified values for compression pressure from the manufacturer data for the engine.

Technical data

Measuring range 0–70 bar / 0–1000 psi (dual scale)
Gauge Ø 80 mm, rubber protective boot, release button
Hose approx. 50 cm, brass quick coupler
Glow plug adapters 8 pcs: M8 × 1, M10 × 1 (4 ×), M10 × 1.25 (2 ×), M12 × 1.25
Injector adapters 5 pcs: M20 × 1.5, M22 × 1.5 (2 ×), M24 × 1.5, M24 × 2
Screw-in adapter M18 × 1.5, long
Accessories Holding plate, copper ring Ø 14 mm, rubber ring Ø 14 mm, aluminium sealing cone Ø 12 mm
Engines Diesel engines in cars, vans, trucks, tractors

Scope of delivery

– Compression gauge 0–70 bar with hose and brass quick coupler

– 8 glow plug adapters

– 5 injector adapters

– 1 screw-in adapter M18 × 1.5

– Holding plate

– Copper ring, rubber ring and aluminium sealing cone

Buy on invoice available (Klarna or PayPal). Professional tool in workshop quality for independent workshops and commercial use – if you have any questions about using it, we will be happy to advise you by phone.

Shipping and payment terms

Free shipping from €50 (Germany) – within the EU from €100

Delivery

Delivery is made to the delivery address provided by the customer during the ordering process. By way of exception, where PayPal is selected as the payment method, the delivery address stored with PayPal at the time of payment is decisive.

If delivery to the customer was not possible and the transport company returns the goods to the seller, the customer bears the costs of the unsuccessful delivery. This does not apply where the customer exercises their right of withdrawal by refusing acceptance, where they are not responsible for the circumstance that made delivery impossible, or where they were temporarily prevented from accepting the goods – unless the seller had given them reasonable advance notice of the delivery.

Shipping costs

  • Germany: free from an order value of €50, below that €3.99
  • European Union: free from an order value of €100, below that €14.99
  • Switzerland: €20.00
  • United Kingdom: GBP 20.00

Delivery area and delivery time

We deliver to Germany, to the 26 other countries of the European Union and to Switzerland and the United Kingdom. We are currently unable to deliver to other countries.

For deliveries to Switzerland and the United Kingdom, customs duties, import taxes or other charges may be incurred in addition; these are borne by the customer.

The delivery time within Germany is usually 1–3 working days.

Payment methods

You can pay by credit card (Visa, Mastercard, Maestro), PayPal, Klarna (purchase on account or instalments), Shop Pay, Apple Pay, Google Pay, advance payment by bank transfer or cash on delivery.

Cash on delivery is only available for deliveries within Germany from an order value of €50. An additional fee of €9.99 is charged for it.

Digital licences and activations

Update licences, secure gateway activations and HaynesPro access are digital goods. No shipping costs apply – you will receive the activation code by email once payment has been received, usually within 1–3 working days.

If the licence is tied to a device, enter your device’s serial number directly in the order form when purchasing. That way we can set up the activation for your device without further enquiries.

Please note: for digital licences the right of withdrawal expires as soon as we have begun providing the item and you have expressly agreed to this beforehand. For devices and all other goods, the statutory right of withdrawal applies unchanged.

What our customers say

"Thank you, happy to order again!"

"Top service, always a pleasure"

"Fast shipping and first-class goods"

"All perfect, happy to order again!"

"Thoroughly satisfied, happy to order again!"

Questions about this product? Send us a message.

Frequently asked questions

How do I measure with the 18-piece diesel compression tester?

Remove the glow plug or injector, screw in the appropriate adapter, connect the gauge via the quick coupler and crank the engine with the starter motor while the fuel injection is deactivated. Read off the maximum value, reset it with the release button and test the next cylinder.

Which threads do the adapters of the diesel compression tester cover?

Glow plug adapters: M8 × 1, M10 × 1, M10 × 1.25 and M12 × 1.25. Injector adapters: M20 × 1.5, M22 × 1.5, M24 × 1.5 and M24 × 2, plus a long screw-in adapter M18 × 1.5. Please compare the thread of your engine beforehand.

Is the 0–70 bar measuring range of the diesel compression tester sufficient?

Yes. The compression pressure of diesel engines is well below 70 bar, so the gauge has sufficient reserve. Take the exact specified values from the manufacturer data for the respective engine.

Can I also use the 18-piece diesel compression tester on petrol engines?

The set is designed for diesel engines and does not contain spark plug adapters. For petrol and diesel engines, we recommend our 46-piece compression and leak-down tester.

18-piece diesel compression tester with gauge, hose, glow plug and injector adapters, holding plate and sealing parts

Diesel Compression Tester 18 pcs for Car & Truck – 0–70 bar, 14 Thread Adapters

auto-diagnostik
5990 €
Diesel compression tester 18 pcs – Measure compression via the glow plug or injector hole ✔ Gauge 0–70 bar (0–1000 psi), Ø 80 mm, with rubber protective boot ✔ 8...
Nennen Sie uns Ihren Preis!
Nennen Sie uns Ihren Preis!
Nennen Sie uns Ihren Preis!