Common Rail High-Pressure Tester 31 pcs for Diesel – Gauge up to 2,000 bar
Common Rail High-Pressure Tester 31 pcs for Diesel – Gauge up to 2,000 bar is backordered and will ship as soon as it is back in stock.
Description
Description
Common rail high-pressure tester 31 pcs – Mechanically measure rail pressure and high-pressure pump
- ✔ Gauge 0–2,000 bar to EN 837-1, class 1.6, with rubber protective boot
- ✔ 4 high-pressure hoses and 4 adapters M12 / M14 for connection in the high-pressure circuit
- ✔ 12 blanking caps for the injector lines and 6 dummy regulators for shutting off
- ✔ With collecting bottle, seal kit, gloves and instructions in a plastic case
If a common rail diesel starts poorly or not at all, or the control unit reports a rail pressure that is too low, the question arises: is it the high-pressure pump, the pressure control, a leaking injector or the rail pressure sensor? The common rail high-pressure tester shows the actual pressure in the high-pressure circuit directly on the gauge – independently of the sensor value in the diagnostic tool. A professional test set in workshop quality for independent workshops and commercial use.
Typical tests
Pressure build-up when starting: Connect the gauge via a high-pressure hose and adapter and read off during cranking whether the pump builds up sufficient pressure. Pump delivery rate: Use the blanking caps to seal the connections of the injector lines and assess the pump pressure independently of the injectors. Pressure control and injectors: On suitable pumps, the flange blanking pieces replace the pressure control valve; together with selectively shutting off individual lines, this lets you narrow down whether a pressure loss originates from the pressure control or from a leaking injector. Compare the measured pressure with the specified value of the manufacturer and with the value of the rail pressure sensor in the diagnostic tool.
Please note
Very high pressures occur in the high-pressure circuit of a common rail system. Only connect or disconnect fittings with the engine switched off and the system depressurised, wear safety goggles and gloves, and collect escaping fuel in the collecting bottle. Test procedures and specified values are vehicle-specific and must be taken from the manufacturer data; the enclosed instructions are in English. Which adapters, blanking caps and dummy regulators fit depends on the pump, rail and line thread – if in doubt, we will be happy to advise you.
Technical data
| Measuring range | 0–2,000 bar |
|---|---|
| Gauge | EN 837-1, accuracy class 1.6, rubber protective boot |
| Test block | T-piece with drain connection |
| Hoses | 4 high-pressure hoses |
| Adapters | 4 pcs for M12 and M14 |
| Blanking caps | 12 pcs in two sizes |
| Dummy regulators | 6 flange blanking pieces in different designs |
| Other accessories | 2 thread adapters, retaining clip, collecting bottle, seal kit, gloves size 10 |
| Case | 44.6 × 30.7 × 11.4 cm |
Scope of delivery
– Gauge 0–2,000 bar with test block
– 4 high-pressure hoses
– 4 adapters M12 / M14
– 12 blanking caps for injector lines
– 6 flange blanking pieces (dummy regulators)
– 2 thread adapters
– Retaining clip
– Collecting bottle
– Bag of O-rings and seals
– Work gloves (size 10)
– Operating instructions (English)
– Plastic case
Buy on invoice available (Klarna or PayPal). Professional tool in workshop quality for independent workshops and commercial use – if you have any questions about using it, we will be happy to advise you by phone.
Shipping and payment terms
Shipping and payment terms
Free shipping from €50 (Germany) – within the EU from €100
Delivery
Delivery is made to the delivery address provided by the customer during the ordering process. By way of exception, where PayPal is selected as the payment method, the delivery address stored with PayPal at the time of payment is decisive.
If delivery to the customer was not possible and the transport company returns the goods to the seller, the customer bears the costs of the unsuccessful delivery. This does not apply where the customer exercises their right of withdrawal by refusing acceptance, where they are not responsible for the circumstance that made delivery impossible, or where they were temporarily prevented from accepting the goods – unless the seller had given them reasonable advance notice of the delivery.
Shipping costs
- Germany: free from an order value of €50, below that €3.99
- European Union: free from an order value of €100, below that €14.99
- Switzerland: €20.00
- United Kingdom: GBP 20.00
Delivery area and delivery time
We deliver to Germany, to the 26 other countries of the European Union and to Switzerland and the United Kingdom. We are currently unable to deliver to other countries.
For deliveries to Switzerland and the United Kingdom, customs duties, import taxes or other charges may be incurred in addition; these are borne by the customer.
The delivery time within Germany is usually 1–3 working days.
Payment methods
You can pay by credit card (Visa, Mastercard, Maestro), PayPal, Klarna (purchase on account or instalments), Shop Pay, Apple Pay, Google Pay, advance payment by bank transfer or cash on delivery.
Cash on delivery is only available for deliveries within Germany from an order value of €50. An additional fee of €9.99 is charged for it.
Digital licences and activations
Update licences, secure gateway activations and HaynesPro access are digital goods. No shipping costs apply – you will receive the activation code by email once payment has been received, usually within 1–3 working days.
If the licence is tied to a device, enter your device’s serial number directly in the order form when purchasing. That way we can set up the activation for your device without further enquiries.
Please note: for digital licences the right of withdrawal expires as soon as we have begun providing the item and you have expressly agreed to this beforehand. For devices and all other goods, the statutory right of withdrawal applies unchanged.
Questions about this product? Send us a message.
Frequently asked questions
What can I test with the 31-piece common rail high-pressure tester?
What can I test with the 31-piece common rail high-pressure tester?
You measure the actual pressure in the high-pressure circuit of a common rail diesel – during cranking, at idle and the delivery pressure of the high-pressure pump. With blanking caps and dummy regulators you can narrow down whether a pressure problem originates from the pump, the pressure control or a leaking injector.
Why measure with the high-pressure tester when the diagnostic tool displays the rail pressure?
Why measure with the high-pressure tester when the diagnostic tool displays the rail pressure?
The diagnostic tool shows the value of the rail pressure sensor. If the sensor itself is faulty, this value is misleading. The gauge displays the pressure independently of it – so the sensor can be checked as well.
What connections does the 31-piece common rail high-pressure tester have?
What connections does the 31-piece common rail high-pressure tester have?
The set includes four high-pressure hoses, four adapters for the thread sizes M12 and M14 and twelve blanking caps in two sizes. Whether the connections fit your vehicle depends on the pump, rail and line thread – if in doubt, we will be happy to advise you.
What should I bear in mind when working with the common rail high-pressure tester?
What should I bear in mind when working with the common rail high-pressure tester?
Only connect or disconnect fittings with the engine switched off and the system depressurised, wear safety goggles and gloves, and collect escaping fuel in the collecting bottle. Specified values and test procedures are vehicle-specific and must be taken from the manufacturer data.
Common Rail High-Pressure Tester 31 pcs for Diesel – Gauge up to 2,000 bar



