6-Channel Electronic Stethoscope for Cars – Locate Chassis & Engine Noises
6-Channel Electronic Stethoscope for Cars – Locate Chassis & Engine Noises is backordered and will ship as soon as it is back in stock.
Description
Description
6-channel electronic stethoscope – Find sources of noise on the chassis, gearbox and engine
- ✔ 6 clamp sensors with crocodile clips – connect six measuring points at the same time
- ✔ Channel selector 1 to 6 with volume control: switch between the measuring points with the rotary knob
- ✔ Additional single-channel mode with 140 mm probe tip for targeted searching on the running engine
- ✔ Piezo sensors with 800 mV/g sensitivity, headphones and case included
Rattling, knocking, grinding or humming that only occurs while driving is often hard to find in the workshop. With the 6-channel electronic stethoscope you attach up to six clamp sensors to suspect components – for example on control arms, anti-roll bars, suspension struts, brake calipers or the gearbox – and listen to each measuring point in turn via the headphones during the test drive. Where the noise is loudest, that is where the cause lies. A diagnostic tool in workshop quality for independent workshops and commercial use.
Six measuring points during the test drive
The sensors are attached to the components with the crocodile clips, and the cables are secured with the supplied hook-and-loop straps and routed to the channel selector. Use the rotary knob to select measuring point 1 to 6 and the knurled wheel to adjust the volume. Colour-marked cables and coloured channel fields make assignment easier. The test drive should be carried out by two people: one drives, the other listens.
Single-channel mode on the running engine
For targeted searching in the engine compartment, fit the probe tip onto the amplifier handset and connect the headphones. This lets you listen to the valve train, injectors, bearings, alternator, water pump or tensioner pulleys, electronically amplified and with adjustable volume.
Please note
The stethoscope does not display measured values but makes structure-borne sound audible – assessing the noises requires experience. Attach sensors and cables so that they cannot come into contact with rotating parts, brake discs or the hot exhaust system, and only carry out the test drive on a suitable route. The channel selector and single-channel amplifier run on 9 V block batteries (6F22). The labelling on the device is in English.
Technical data
| Design | Electronic stethoscope for 6-channel and single-channel operation |
|---|---|
| Sensor type | Piezoelectric accelerometer |
| Sensitivity | max. 800 mV/g |
| Signal ratio | 60 to 120 dB |
| Resonant frequency | 24 kHz |
| Measuring points | 6 clamp sensors with crocodile clips, channel selection via rotary switch |
| Probe tip | 140 mm (single-channel mode) |
| Power supply | 9 V block battery (6F22), power consumption below 15 mW |
| Case | approx. 41 × 35 × 11 cm |
Scope of delivery
– 6-channel selector with volume control
– 6 clamp sensors with crocodile clips and colour-marked cables
– Single-channel amplifier (handset) with volume control
– Probe tip for the single-channel amplifier
– Headphones
– 2 × 9 V block battery (6F22)
– 7 hook-and-loop straps for securing the cables
– Plastic case
Buy on invoice available (Klarna or PayPal). Professional tool in workshop quality for independent workshops and commercial use – if you have any questions about using it, we will be happy to advise you by phone.
Shipping and payment terms
Shipping and payment terms
Free shipping from €50 (Germany) – within the EU from €100
Delivery
Delivery is made to the delivery address provided by the customer during the ordering process. By way of exception, where PayPal is selected as the payment method, the delivery address stored with PayPal at the time of payment is decisive.
If delivery to the customer was not possible and the transport company returns the goods to the seller, the customer bears the costs of the unsuccessful delivery. This does not apply where the customer exercises their right of withdrawal by refusing acceptance, where they are not responsible for the circumstance that made delivery impossible, or where they were temporarily prevented from accepting the goods – unless the seller had given them reasonable advance notice of the delivery.
Shipping costs
- Germany: free from an order value of €50, below that €3.99
- European Union: free from an order value of €100, below that €14.99
- Switzerland: €20.00
- United Kingdom: GBP 20.00
Delivery area and delivery time
We deliver to Germany, to the 26 other countries of the European Union and to Switzerland and the United Kingdom. We are currently unable to deliver to other countries.
For deliveries to Switzerland and the United Kingdom, customs duties, import taxes or other charges may be incurred in addition; these are borne by the customer.
The delivery time within Germany is usually 1–3 working days.
Payment methods
You can pay by credit card (Visa, Mastercard, Maestro), PayPal, Klarna (purchase on account or instalments), Shop Pay, Apple Pay, Google Pay, advance payment by bank transfer or cash on delivery.
Cash on delivery is only available for deliveries within Germany from an order value of €50. An additional fee of €9.99 is charged for it.
Digital licences and activations
Update licences, secure gateway activations and HaynesPro access are digital goods. No shipping costs apply – you will receive the activation code by email once payment has been received, usually within 1–3 working days.
If the licence is tied to a device, enter your device’s serial number directly in the order form when purchasing. That way we can set up the activation for your device without further enquiries.
Please note: for digital licences the right of withdrawal expires as soon as we have begun providing the item and you have expressly agreed to this beforehand. For devices and all other goods, the statutory right of withdrawal applies unchanged.
Questions about this product? Send us a message.
Frequently asked questions
How do I find a chassis noise with the 6-channel electronic stethoscope?
How do I find a chassis noise with the 6-channel electronic stethoscope?
Attach the six clamp sensors to the suspect components, secure the cables with the hook-and-loop straps and route them to the channel selector. During the test drive, switch through the channels one after the other – the cause lies at the measuring point with the loudest noise.
Can I also use the electronic stethoscope directly on the running engine?
Can I also use the electronic stethoscope directly on the running engine?
Yes. In single-channel mode, fit the 140 mm probe tip onto the amplifier handset and listen specifically at the valve train, injectors, bearings or ancillary units. Watch out for belts, fan and hot parts.
What power supply does the 6-channel stethoscope need?
What power supply does the 6-channel stethoscope need?
The channel selector and single-channel amplifier run on 9 V block batteries of type 6F22; two batteries are included. According to the data sheet, the power consumption is below 15 mW.
What is included in the case of the 6-channel electronic stethoscope?
What is included in the case of the 6-channel electronic stethoscope?
Channel selector, six clamp sensors with crocodile clips, single-channel amplifier with probe tip, headphones, two 9 V batteries and seven hook-and-loop straps – all in a plastic case with moulded insert.
6-Channel Electronic Stethoscope for Cars – Locate Chassis & Engine Noises



