Turbo Leak Tester 9 pcs for Charge Air Systems – Adapters 35–90 mm, Regulator
Turbo Leak Tester 9 pcs for Charge Air Systems – Adapters 35–90 mm, Regulator is backordered and will ship as soon as it is back in stock.
Description
Description
Turbo leak tester 9 pcs – Find leaks in the charge air system
- ✔ Stepped adapters for hoses from 35 to 90 mm – 12 diameters in 5 mm steps
- ✔ 4 test adapters with connection nipple and 4 blanking plugs – one matching pair per size range
- ✔ Inflator unit with pressure regulator, gauge and ball valve for fine adjustment of the test pressure
- ✔ For intercoolers, charge air hoses and pipes on turbocharged engines, all in a plastic case
Loss of power, whistling noises or a fault code relating to boost pressure: the cause is often a leak in the charge air system – a torn hose, a loose clamp or a leaking intercooler. With the 9-piece turbo leak tester you seal the charge air tract at both ends, pressurise it with compressed air with the engine stopped and find the leak instead of replacing parts on suspicion. A professional tool in workshop quality for independent workshops and commercial use.
How to test
Disconnect the charge air tract at both ends, for example at the turbocharger and at the throttle valve. Insert the test adapter with nipple into one hose end and the blanking plug from the same size range into the other, and secure both with the hose clamps. Connect the inflator unit to compressed air, connect it to the nipple with the test hose and slowly increase the pressure on the regulator, starting from a low value. You can hear leaks by the hissing or make them visible with leak detection spray or soapy water; if the pressure on the gauge remains stable, the tract is tight.
The adapters at a glance
The eight stepped adapters form four pairs of test adapter and blanking plug. Each pair covers three hose diameters: 35/40/45 mm, 50/55/60 mm, 65/70/75 mm and 80/85/90 mm.
Please note
Compressed air (compressor) is required for operation and is not included in the scope of delivery. The compressed air connection on the ball valve has a female thread – a plug nipple to match your compressed air coupling is not included. Only test with the engine stopped and at low pressure, at most up to the boost pressure specified by the vehicle manufacturer. According to the manufacturer, the gauge measures 0 to 5 bar (0 to 70 psi).
Technical data
| Contents | 9 pieces in a plastic case |
|---|---|
| Hose diameter | 35 to 90 mm in 5 mm steps (12 sizes) |
| Adapters | 4 test adapters with connection nipple, 4 blanking plugs, each stepped |
| Size ranges | 35–45 / 50–60 / 65–75 / 80–90 mm |
| Inflator unit | Pressure regulator with rotary knob, gauge (bar/psi), ball valve, test hose with coupling |
| Gauge | 0–5 bar / 0–70 psi (manufacturer specification) |
| Compressed air connection | Female thread on the ball valve |
Scope of delivery
– Inflator unit with pressure regulator, gauge, ball valve and test hose
– 4 stepped test adapters with connection nipple
– 4 stepped blanking plugs
– Plastic case
Buy on invoice available (Klarna or PayPal). Professional tool in workshop quality for independent workshops and commercial use – if you have any questions about using it, we will be happy to advise you by phone.
Shipping and payment terms
Shipping and payment terms
Free shipping from €50 (Germany) – within the EU from €100
Delivery
Delivery is made to the delivery address provided by the customer during the ordering process. By way of exception, where PayPal is selected as the payment method, the delivery address stored with PayPal at the time of payment is decisive.
If delivery to the customer was not possible and the transport company returns the goods to the seller, the customer bears the costs of the unsuccessful delivery. This does not apply where the customer exercises their right of withdrawal by refusing acceptance, where they are not responsible for the circumstance that made delivery impossible, or where they were temporarily prevented from accepting the goods – unless the seller had given them reasonable advance notice of the delivery.
Shipping costs
- Germany: free from an order value of €50, below that €3.99
- European Union: free from an order value of €100, below that €14.99
- Switzerland: €20.00
- United Kingdom: GBP 20.00
Delivery area and delivery time
We deliver to Germany, to the 26 other countries of the European Union and to Switzerland and the United Kingdom. We are currently unable to deliver to other countries.
For deliveries to Switzerland and the United Kingdom, customs duties, import taxes or other charges may be incurred in addition; these are borne by the customer.
The delivery time within Germany is usually 1–3 working days.
Payment methods
You can pay by credit card (Visa, Mastercard, Maestro), PayPal, Klarna (purchase on account or instalments), Shop Pay, Apple Pay, Google Pay, advance payment by bank transfer or cash on delivery.
Cash on delivery is only available for deliveries within Germany from an order value of €50. An additional fee of €9.99 is charged for it.
Digital licences and activations
Update licences, secure gateway activations and HaynesPro access are digital goods. No shipping costs apply – you will receive the activation code by email once payment has been received, usually within 1–3 working days.
If the licence is tied to a device, enter your device’s serial number directly in the order form when purchasing. That way we can set up the activation for your device without further enquiries.
Please note: for digital licences the right of withdrawal expires as soon as we have begun providing the item and you have expressly agreed to this beforehand. For devices and all other goods, the statutory right of withdrawal applies unchanged.
Questions about this product? Send us a message.
Frequently asked questions
What do I need the 9-piece turbo leak tester for?
What do I need the 9-piece turbo leak tester for?
With the leak tester you pressurise the charge air system with the engine stopped and find leaks at the intercooler, hoses, pipes and clamps. Such leaks often cause loss of power, whistling noises or fault codes relating to boost pressure.
Which hose sizes does the 9-piece turbo leak tester fit?
Which hose sizes does the 9-piece turbo leak tester fit?
The stepped adapters fit hoses with an inside diameter of 35 to 90 mm, in 5 mm steps. For each size range – 35–45, 50–60, 65–75 and 80–90 mm – there is a test adapter with nipple and a matching blanking plug.
What else do I need in addition to the turbo leak tester?
What else do I need in addition to the turbo leak tester?
A compressed air supply, i.e. a compressor, and a plug nipple matching your compressed air coupling for the female thread on the ball valve. Leak detection spray or soapy water is recommended to make small leaks visible.
What pressure do I use for testing with the turbo leak tester?
What pressure do I use for testing with the turbo leak tester?
Start with low pressure and increase it gradually, at most up to the boost pressure specified by the vehicle manufacturer. The pressure regulator of the inflator unit finely adjusts the test pressure, and the gauge displays it.
Turbo Leak Tester 9 pcs for Charge Air Systems – Adapters 35–90 mm, Regulator



