Hand Vacuum Pump with Gauge for Cars – Vacuum Testing & Brake Bleeding
Hand Vacuum Pump with Gauge for Cars – Vacuum Testing & Brake Bleeding is backordered and will ship as soon as it is back in stock.
Description
Description
Hand vacuum pump with gauge – Test vacuum and bleed brakes
- ✔ Generate vacuum and pressure – switchable via the ring on the pump head
- ✔ Gauge with scales in bar, inHg and psi: displays down to −1 bar vacuum and up to 3 bar pressure
- ✔ Test vacuum actuators, EGR valves and wastegate actuators as well as vacuum lines precisely
- ✔ Brake and clutch bleeding with two 120 ml collection containers, 12 adapters and hoses in a case
The hand vacuum pump with gauge is a versatile test tool for independent workshops and commercial use. Using the hand lever, you generate vacuum in a controlled way and read on the gauge whether a component responds and whether it holds the vacuum. This lets you test vacuum units and actuators, for example on the EGR valve, wastegate or intake manifold flaps, and check vacuum lines for leaks – without the engine running. At the same time, the set is a complete brake bleeding kit: with a collection container and adapters, you can bleed brakes and hydraulic clutches on your own. Workshop quality in a sturdy case.
Testing vacuum actuators, EGR and wastegate
Connect the hose to the vacuum port of the actuator using a suitable adapter and slowly pump up the vacuum. If the linkage moves and the gauge needle stays put, the actuator is in order. If the value drops, the diaphragm or line is leaking. Use the black ring on the pump head to switch between suction (vacuum) and pressure (positive pressure).
Bleeding brakes and clutch
For bleeding, a collection container is placed between the pump and the bleed valve: the side of the lid marked “TO PUMP” is connected to the pump, the other side to the bleed valve via hose and adapter. Using vacuum, you draw brake fluid and air into the container – without a second person on the brake pedal. Each of the two containers holds 120 ml.
Please note
The gauge displays vacuum down to −1 bar; with the hand pump, around 20 inHg (approx. −0.68 bar) can be reached in normal operation. The set is not intended for extracting or transferring fuel. Always connect the container lid with the “TO PUMP” side towards the pump so that no fluid enters the pump; brake fluid attacks paintwork and must be disposed of properly. On vehicles with ABS/ESP, an additional bleeding routine using a diagnostic tool may be necessary depending on the manufacturer. Labelling and instructions are in English.
Technical data
| Design | Hand vacuum and pressure pump with gauge |
|---|---|
| Function | Vacuum and pressure, switchable on the pump head |
| Gauge | Scales in bar, inHg and psi |
| Vacuum display range | 0 to −1 bar |
| Pressure display range | 0 to 3 bar (0 to 40 psi) |
| Achievable vacuum | approx. 20 inHg (around −0.68 bar) in normal operation |
| Pump body | Aluminium, rubberised grips |
| Collection containers | 2 × 120 ml, lid with sealing ring |
| Adapters | 12 pcs, conical, angled and straight |
| Storage | Plastic case with moulded insert |
Scope of delivery
– Hand vacuum pump with gauge
– 2 collection containers of 120 ml each with lids
– 12 adapters (conical, angled and straight)
– 1 long hose and 3 short hose sections
– 1 suction cup
– Plastic case
– Operating instructions (English)
Buy on invoice available (Klarna or PayPal). Professional tool in workshop quality for independent workshops and commercial use – if you have any questions about using it, we will be happy to advise you by phone.
Shipping and payment terms
Shipping and payment terms
Free shipping from €50 (Germany) – within the EU from €100
Delivery
Delivery is made to the delivery address provided by the customer during the ordering process. By way of exception, where PayPal is selected as the payment method, the delivery address stored with PayPal at the time of payment is decisive.
If delivery to the customer was not possible and the transport company returns the goods to the seller, the customer bears the costs of the unsuccessful delivery. This does not apply where the customer exercises their right of withdrawal by refusing acceptance, where they are not responsible for the circumstance that made delivery impossible, or where they were temporarily prevented from accepting the goods – unless the seller had given them reasonable advance notice of the delivery.
Shipping costs
- Germany: free from an order value of €50, below that €3.99
- European Union: free from an order value of €100, below that €14.99
- Switzerland: €20.00
- United Kingdom: GBP 20.00
Delivery area and delivery time
We deliver to Germany, to the 26 other countries of the European Union and to Switzerland and the United Kingdom. We are currently unable to deliver to other countries.
For deliveries to Switzerland and the United Kingdom, customs duties, import taxes or other charges may be incurred in addition; these are borne by the customer.
The delivery time within Germany is usually 1–3 working days.
Payment methods
You can pay by credit card (Visa, Mastercard, Maestro), PayPal, Klarna (purchase on account or instalments), Shop Pay, Apple Pay, Google Pay, advance payment by bank transfer or cash on delivery.
Cash on delivery is only available for deliveries within Germany from an order value of €50. An additional fee of €9.99 is charged for it.
Digital licences and activations
Update licences, secure gateway activations and HaynesPro access are digital goods. No shipping costs apply – you will receive the activation code by email once payment has been received, usually within 1–3 working days.
If the licence is tied to a device, enter your device’s serial number directly in the order form when purchasing. That way we can set up the activation for your device without further enquiries.
Please note: for digital licences the right of withdrawal expires as soon as we have begun providing the item and you have expressly agreed to this beforehand. For devices and all other goods, the statutory right of withdrawal applies unchanged.
Questions about this product? Send us a message.
Frequently asked questions
Can I test the wastegate actuator on the turbocharger with the hand vacuum pump with gauge?
Can I test the wastegate actuator on the turbocharger with the hand vacuum pump with gauge?
Yes. Connect the hose to the vacuum actuator via a suitable adapter and slowly pump up the vacuum. If the linkage moves and the gauge holds the value, the actuator and diaphragm are tight.
Is the hand vacuum pump suitable for testing the EGR valve?
Is the hand vacuum pump suitable for testing the EGR valve?
For vacuum-controlled EGR valves, yes: build up vacuum, watch the valve movement and check on the gauge whether the value is held. Electrically actuated EGR valves, on the other hand, are tested with a diagnostic tool.
How do I bleed the brakes with the hand vacuum pump?
How do I bleed the brakes with the hand vacuum pump?
Connect a collection container to the pump with the “TO PUMP” side of the lid, and the other side to the bleed valve via hose and adapter. Open the valve and pump vacuum until no more air bubbles appear – do not let the reservoir run empty in the process.
What is included in the case of the hand vacuum pump?
What is included in the case of the hand vacuum pump?
The pump with gauge, two collection containers of 120 ml each, twelve adapters, one long and three short hoses, a suction cup and English instructions – all in a plastic case with moulded insert.
Hand Vacuum Pump with Gauge for Cars – Vacuum Testing & Brake Bleeding


