Diagnostic Tool for Cars, Trucks, Buses & CNH Machinery – Toughbook CF-33

Car diagnostic tool for cars, trucks, buses and CNH construction machinery with Panasonic Toughbook CF-33

• ✔ 24 months of technical support (by phone and via remote maintenance)
• ✔ 12-month warranty on the complete system
• ✔ Fully set up & ready for immediate use
• ✔ 3 years of free updates for the car software
• ✔ Developed for independent workshops and professional automotive use
• ✔ 30-day Autodata demo version free of charge

This professional car diagnostic tool is a genuine combination device for cars, trucks, coaches and CNH construction machinery and was developed for independent workshops, vehicle fleets, mobile service technicians and diagnostic specialists. You receive workshop-quality diagnostics for professional commercial use – coding, adaptation and matching instead of merely reading out data. All components are supplied fully preconfigured and are ready for immediate use. Purchase on account is possible via Klarna or PayPal.

Vehicle and machinery coverage by model year

The complete system covers three software worlds in one device. The maximum model year coverage per vehicle class:

• Cars up to model year 2025 – including 3 years of free updates for the car software
• Trucks up to model year 2023
• Coaches up to model year 2023
• CNH construction machinery up to model year 2026

More than 110 car brands and more than 60 truck & bus brands

On the car side, 110 car brands are supported, including:

Alfa Romeo, Audi, BMW, Buick, Cadillac, Chevrolet, Chrysler, Citroën, Dacia, Daewoo, Daihatsu, Dodge, Fiat, Ford, Honda, Hyundai, Infiniti, Isuzu, Iveco, Jaguar, Jeep, Kia, Lada, Lancia, Land Rover, Lexus, Lincoln, Mazda, Mercedes-Benz, MG, Mini, Mitsubishi, Nissan, Opel, Peugeot, Porsche, Proton, Renault, Rover, Saab, Seat, Škoda, Smart, SsangYong, Subaru, Suzuki, Toyota, Volvo, Volkswagen and many more.

For commercial vehicles, more than 60 truck and bus brands are available, including:

Mercedes-Benz, MAN, Scania, Volvo, DAF, Iveco, Renault Trucks, Setra, Neoplan, Solaris, Ford Trucks, Isuzu, Fuso, Kässbohrer, Temsa and many more.

CNH construction machinery and agricultural machinery (CNH Electronic Service Tool)

The CNH Electronic Service Tool (EST) is available for construction and agricultural machinery. Coverage includes, among others:

• Case IH / Case Construction – e.g. Puma, Maxxum, Magnum, Farmall, CVX as well as the excavators of the CX series and wheel loaders
• New Holland – e.g. T7, T6, T5, TM and TG series as well as excavators and wheel loaders of the W series
• Steyr – e.g. Profi, CVT, Kompakt, Expert
• Iveco / FPT engines, as far as covered by the CNH EST

Fault diagnosis, ECU programming, parameter adaptation, system tests and real-time monitoring of engine and hydraulic values are possible.

30-day Autodata demo version free of charge

With this combination device you receive a 30-day free Autodata demo version. This lets you test repair instructions, service schedules, wiring diagrams and technical data without obligation and check whether an Autodata subscription is worthwhile for your workshop.

Important note on vehicle coverage

The model year information describes the overall period that the device can cover across all supported brands – it does not mean that every brand or every model is automatically fully supported up to the stated model year. Which vehicles and functions are actually available always depends on the manufacturer, model, model year and control unit. The 3-year update guarantee for the car software ensures that coverage keeps growing and that new vehicle models are added continuously.

Professional diagnostic functions for everyday workshop use

• Complete control unit diagnostics across all systems
• Read and clear fault codes
• Analyse live data and measured values
• Perform actuator tests
• Reset service intervals
• DPF regeneration
• Steering angle sensor calibration
• Adaptations and coding depending on the vehicle model

The diagnostic tool supports numerous vehicle protocols such as CAN bus, K-Line and LIN bus, so that even complex control unit networks are analysed reliably.

Rugged Panasonic Toughbook CF-33

The supplied Panasonic Toughbook CF-33 is refurbished, technically inspected and in very good condition. The rugged, hard-wearing housing is made specifically for demanding working environments such as workshops, construction sites and mobile field service, and is designed for daily professional use.

Scope of delivery

– Panasonic Toughbook CF-33 (refurbished, fully set up)

– Vident Bluetooth multiplexer for cars

– Automaster FSX Pro multiplexer for trucks and buses

– CNH Dearborn DPA5 multiplexer for construction machinery

– OBD2 diagnostic cable and adapter

– 9-pin adapter

– USB cable

– Charger

– Fully set up diagnostic software

– 30-day Autodata demo version

All systems are delivered preconfigured – workshops and service technicians can start diagnosing vehicles and construction machinery immediately. Note: The available diagnostic, service and programming functions always depend on the vehicle, model and control unit. Vehicle coverage may vary depending on the manufacturer and model year.

Free shipping from €50 (Germany) – within the EU from €100

Delivery

Delivery is made to the delivery address provided by the customer during the ordering process. By way of exception, where PayPal is selected as the payment method, the delivery address stored with PayPal at the time of payment is decisive.

If delivery to the customer was not possible and the transport company returns the goods to the seller, the customer bears the costs of the unsuccessful delivery. This does not apply where the customer exercises their right of withdrawal by refusing acceptance, where they are not responsible for the circumstance that made delivery impossible, or where they were temporarily prevented from accepting the goods – unless the seller had given them reasonable advance notice of the delivery.

Shipping costs

• Germany: free from an order value of €50, below that €3.99
• European Union: free from an order value of €100, below that €14.99
• Switzerland: €20.00
• United Kingdom: GBP 20.00

Delivery area and delivery time

We deliver to Germany, to the 26 other countries of the European Union and to Switzerland and the United Kingdom. We are currently unable to deliver to other countries.

For deliveries to Switzerland and the United Kingdom, customs duties, import taxes or other charges may be incurred in addition; these are borne by the customer.

The delivery time within Germany is usually 1–3 working days.

Payment methods

You can pay by credit card (Visa, Mastercard, Maestro), PayPal, Klarna (purchase on account or instalments), Shop Pay, Apple Pay, Google Pay, advance payment by bank transfer or cash on delivery.

Cash on delivery is only available for deliveries within Germany from an order value of €50. An additional fee of €9.99 is charged for it.

Digital licences and activations

Update licences, secure gateway activations and HaynesPro access are digital goods. No shipping costs apply – you will receive the activation code by email once payment has been received, usually within 1–3 working days.

If the licence is tied to a device, enter your device’s serial number directly in the order form when purchasing. That way we can set up the activation for your device without further enquiries.

Please note: for digital licences the right of withdrawal expires as soon as we have begun providing the item and you have expressly agreed to this beforehand. For devices and all other goods, the statutory right of withdrawal applies unchanged.