Compression & Leak-Down Tester 46 pcs for Petrol & Diesel – in Carry Case
Compression & Leak-Down Tester 46 pcs for Petrol & Diesel – in Carry Case is backordered and will ship as soon as it is back in stock.
Description
Description
Compression and leak-down tester 46 pcs – Reliably assess compression and cylinder sealing
- ✔ Two tests in one set: compression test and leak-down test
- ✔ Compression gauge 0–50 bar (0–700 psi) with rubber protective boot and release button
- ✔ Leak-down tester with pressure regulator: inlet pressure 0–7 bar, pressure loss in percent
- ✔ Adapters for petrol and diesel engines – spark plug, glow plug and injector holes, all in a case
If an engine runs rough, is hard to start or loses power, compression is one of the first things to check. With the 46-piece compression and leak-down tester you first measure the compression pressure of each cylinder and then use the leak-down test to find out where the compression is being lost – at the valves, at the piston rings or at the cylinder head gasket. A professional test set in workshop quality for independent workshops and commercial use, for petrol and diesel engines.
Compression test: compare the cylinders
Screw the appropriate adapter into the spark plug, glow plug or injector hole, connect the compression gauge via the quick coupler and crank the engine with the starter motor. After each measurement, reset the reading with the release button and test the next cylinder. What matters is the comparison: if one cylinder deviates significantly from the others, a leak-down test follows.
Leak-down test: narrow down the cause
Turn the piston of the cylinder to top dead centre on the compression stroke, connect the leak-down tester to compressed air and set the inlet pressure on the regulator. The large gauge shows what percentage of the pressure the cylinder is losing. Where the air escapes reveals the cause: hissing in the intake points to the intake valve, at the exhaust to the exhaust valve, at the oil filler neck to the piston rings, and bubbles in the coolant to the cylinder head gasket.
Please note
The leak-down test requires compressed air from the workshop supply or a compressor, which is not included in the scope of delivery. It is connected via a plug nipple on the pressure regulator – depending on the coupling system in your workshop, a matching nipple may be required. If the piston is not exactly at top dead centre, the air pressure can turn the engine: keep hands away from belts and fan. Take the specified values for compression pressure and permissible pressure loss from the manufacturer data for the engine. Which adapter fits depends on the thread and installation situation; the gauge scales are labelled in English or in bar and psi.
Technical data
| Contents | 46-piece set, compression and leak-down tester |
|---|---|
| Engines | Petrol and diesel engines |
| Compression gauge | 0–50 bar / 0–700 psi, rubber protective boot, release button |
| Leak-down tester | Pressure regulator, inlet gauge 0–7 bar / 0–100 psi |
| Leak-down gauge | 0–100 % with coloured zones |
| Connections | Brass quick couplers, compressed air plug nipple on the regulator |
| Adapters | for spark plug, glow plug and injector holes |
| Storage | Plastic case with foam insert |
Scope of delivery
– Compression tester with 0–50 bar gauge and hose
– Leak-down tester with pressure regulator and two gauges
– Connecting hoses with quick couplers
– Adapters for spark plug, glow plug and injector holes (petrol and diesel)
– Holding plates for injector adapters
– Extension with knurled grip
– PTFE sealing tape
– Plastic case with foam insert
Buy on invoice available (Klarna or PayPal). Professional tool in workshop quality for independent workshops and commercial use – if you have any questions about using it, we will be happy to advise you by phone.
Shipping and payment terms
Shipping and payment terms
Free shipping from €50 (Germany) – within the EU from €100
Delivery
Delivery is made to the delivery address provided by the customer during the ordering process. By way of exception, where PayPal is selected as the payment method, the delivery address stored with PayPal at the time of payment is decisive.
If delivery to the customer was not possible and the transport company returns the goods to the seller, the customer bears the costs of the unsuccessful delivery. This does not apply where the customer exercises their right of withdrawal by refusing acceptance, where they are not responsible for the circumstance that made delivery impossible, or where they were temporarily prevented from accepting the goods – unless the seller had given them reasonable advance notice of the delivery.
Shipping costs
- Germany: free from an order value of €50, below that €3.99
- European Union: free from an order value of €100, below that €14.99
- Switzerland: €20.00
- United Kingdom: GBP 20.00
Delivery area and delivery time
We deliver to Germany, to the 26 other countries of the European Union and to Switzerland and the United Kingdom. We are currently unable to deliver to other countries.
For deliveries to Switzerland and the United Kingdom, customs duties, import taxes or other charges may be incurred in addition; these are borne by the customer.
The delivery time within Germany is usually 1–3 working days.
Payment methods
You can pay by credit card (Visa, Mastercard, Maestro), PayPal, Klarna (purchase on account or instalments), Shop Pay, Apple Pay, Google Pay, advance payment by bank transfer or cash on delivery.
Cash on delivery is only available for deliveries within Germany from an order value of €50. An additional fee of €9.99 is charged for it.
Digital licences and activations
Update licences, secure gateway activations and HaynesPro access are digital goods. No shipping costs apply – you will receive the activation code by email once payment has been received, usually within 1–3 working days.
If the licence is tied to a device, enter your device’s serial number directly in the order form when purchasing. That way we can set up the activation for your device without further enquiries.
Please note: for digital licences the right of withdrawal expires as soon as we have begun providing the item and you have expressly agreed to this beforehand. For devices and all other goods, the statutory right of withdrawal applies unchanged.
Questions about this product? Send us a message.
Frequently asked questions
What do I test with the 46-piece compression and leak-down tester?
What do I test with the 46-piece compression and leak-down tester?
With the compression gauge you measure the compression pressure of each cylinder and identify weak cylinders. The leak-down tester then shows, as a percentage, how much pressure a cylinder is losing, helping you to narrow down the cause – valves, piston rings or cylinder head gasket.
Is the 46-piece set suitable for petrol and diesel engines?
Is the 46-piece set suitable for petrol and diesel engines?
Yes. The set contains adapters for the spark plug holes of petrol engines and for the glow plug and injector holes of diesel engines; the compression gauge measures up to 50 bar. Whether an adapter fits a particular engine depends on the thread and installation situation.
What else do I need for the leak-down test with the 46-piece set?
What else do I need for the leak-down test with the 46-piece set?
Compressed air from the workshop supply or a compressor. The tester is connected via a plug nipple on the pressure regulator – depending on the coupling system in your workshop, you may need a matching nipple.
How do I read the leak-down gauge of the 46-piece set?
How do I read the leak-down gauge of the 46-piece set?
First set the inlet pressure on the regulator; the large gauge then shows the pressure loss of the cylinder as a percentage. The coloured zones serve as a guide; the specifications of the respective engine manufacturer are decisive.
Compression & Leak-Down Tester 46 pcs for Petrol & Diesel – in Carry Case


